Tips on how to set up fender flares? This complete information breaks down all the course of, from prepping your experience to attaining a flawless, completed look. Whether or not you are a seasoned DIY fanatic or a beginner tackling this undertaking for the primary time, we have got you coated. We’ll discover completely different flare varieties, important instruments, security precautions, and superior strategies for numerous car purposes.
Prepare to remodel your experience and increase its type with confidence.
Fender flares aren’t nearly aesthetics; they provide sensible advantages like improved mud and water safety, enhancing the car’s general safety and magnificence. This information delves into the specifics of every stage, equipping you with the data and techniques to deal with this undertaking with confidence and ability. We’ll element the whole lot from choosing the proper flares in your car to the ultimate touches, making certain a professional-looking set up.
Introduction to Fender Flares
Fender flares are plastic, metallic, or fiberglass extensions which are added to the wheel wells of a car. They serve an important perform by defending the car’s physique from rocks, particles, and highway spray, particularly necessary for vehicles, SUVs, and off-road automobiles. Additionally they improve the car’s aesthetic attraction and may enhance its off-road capabilities.Fender flares can be found in a wide range of supplies, every with its personal set of professionals and cons.
Understanding these variations will show you how to make an knowledgeable resolution when selecting flares in your car.
Fender Flare Supplies
Completely different supplies have an effect on the fee, sturdiness, and general efficiency of fender flares. Plastic flares are sometimes probably the most inexpensive choice, whereas metal flares usually provide one of the best safety. Fiberglass flares fall in between by way of price and sturdiness.
- Metal Fender Flares: Metal flares are recognized for his or her strong building and superior safety. They’re exceptionally sturdy and may stand up to vital impacts from rocks and particles. Nonetheless, they’re heavier than different supplies and will be costlier to put in and buy.
- Plastic Fender Flares: Plastic flares are a preferred alternative because of their comparatively low price. They’re light-weight and simple to put in, making them a sensible choice for a lot of car homeowners. Nonetheless, their sturdiness will be a problem, as they might not stand up to extreme impacts in addition to metal or fiberglass flares. Plastic flares will be susceptible to cracking or warping, and so they will not be the only option for automobiles steadily utilized in difficult off-road environments.
- Fiberglass Fender Flares: Fiberglass flares provide a great steadiness between price and sturdiness. They’re extra resistant to wreck than plastic flares, whereas remaining lighter than metal. Fiberglass is usually a great compromise for automobiles that see average use in numerous situations.
Automobile Functions
Fender flares are appropriate for numerous car varieties, every with its personal necessities and aesthetics. Vehicles, SUVs, and even some vehicles can profit from the added safety and magnificence.
- Vehicles: Vehicles, particularly these used for hauling or off-roading, profit considerably from fender flares. The elevated safety is significant in stopping injury to the car’s physique from rocks, filth, and different particles thrown up by the tires.
- SUVs: SUVs additionally profit from the added safety of fender flares. The excessive clearance of many SUVs permits for elevated publicity to flying particles. The added type of flares enhances the general look of an SUV, significantly these utilized in difficult environments.
- Automobiles: Fender flares can be utilized on vehicles to offer added safety and improve the automotive’s look. That is significantly helpful for vehicles utilized in inclement climate or these pushed in areas with vital highway particles.
Fender Flare Comparability Desk
| Materials | Price | Sturdiness | Safety | Weight |
|---|---|---|---|---|
| Metal | Excessive | Excessive | Wonderful | Excessive |
| Plastic | Low | Medium | Reasonable | Low |
| Fiberglass | Medium | Excessive | Good | Medium |
Observe: Price and sturdiness are relative to the precise flare and set up. A high-quality plastic flare could be extra sturdy than a budget-friendly metal flare.
Preparation for Set up
Getting your fender flares prepared for set up is essential for a easy and profitable final result. Correct preparation minimizes potential issues and ensures a clear, professional-looking last product. This includes cautious floor prep, exact measurements, and the proper instruments to keep away from errors and guarantee a long-lasting set up.
Important Instruments
Cautious collection of instruments is paramount for a profitable fender flare set up. Having the proper instruments will stop frustration and guarantee accuracy. A complete toolkit will streamline the method and reduce the probabilities of injury to your car or the flares themselves.
- Measuring tape:
- Security glasses and gloves:
- Pencil or marker:
- Influence driver or socket wrench set:
- Pry bar or flathead screwdriver:
- Clear rags or cloths:
- Primer (if wanted):
Correct measurements are important for correct fitment. A high-quality measuring tape ensures exact dimensions, stopping points with misalignment or improper sizing. A versatile measuring tape is helpful for complicated curves or hard-to-reach areas.
Defending your self is vital throughout any set up course of. Security glasses defend your eyes from particles, whereas gloves safeguard your palms from scratches and cuts.
Marking the car’s floor for exact alignment is crucial. A high quality marking software permits for clear and visual markings, making certain correct placement of the flares.
For eradicating and reinstalling fasteners, a dependable influence driver or socket wrench set is a should. This ensures environment friendly and secure fastener removing and set up. That is necessary for avoiding stripping bolts or damaging the car’s paint.
These instruments are useful for maneuvering and positioning the flares. Their versatility ensures flexibility in numerous set up situations.
Eradicating mud, filth, and different particles is crucial for correct adhesion and a clear set up. Clear rags are vital for sustaining a clear working surroundings.
Relying on the floor and the kind of flares, primer could also be crucial for higher adhesion. A great high quality primer is essential for making certain a long-lasting set up.
Security Precautions
Prioritizing security throughout set up is non-negotiable. Accidents can happen simply, so taking precautions is essential for safeguarding your self and your car.
- Work in a well-lit space:
- Use jack stands and acceptable lifting tools:
- Put on acceptable security gear:
- Maintain the realm away from obstructions:
- Disconnect the battery:
Good lighting ensures clear visibility, minimizing the chance of errors.
Elevating the car to work beneath it safely is vital for accessibility and stability. Applicable jack stands make sure the car is securely supported.
Security glasses and gloves defend you from flying particles, sharp edges, and potential accidents. At all times prioritize security when working in your car.
A transparent workspace prevents accidents and ensures secure motion throughout the set up course of. This consists of eradicating pointless gadgets and making certain enough house for maneuverability.
This prevents any electrical points throughout the set up.
Obligatory Supplies (Apart from Flares)
Apart from the fender flares themselves, a number of supplies are crucial for a profitable set up. These supplies are very important for attaining an expert and long-lasting set up.
- Automobile-specific adhesive or mounting {hardware}:
- Primer (if wanted):
- Paints and touch-up paint:
- Caulk or sealant (if wanted):
Applicable adhesive or mounting {hardware} ensures the flares are securely mounted to the car. Utilizing the proper {hardware} in your car is necessary for longevity.
Primer ensures a powerful bond between the flares and the car’s floor. Utilizing primer is beneficial for a long-lasting set up.
Matching the paint to your car’s current paint is essential for a seamless look. Contact-up paint is crucial for repairing any minor scratches or imperfections throughout the set up course of.
Filling gaps and stopping water intrusion is crucial. Caulk is significant for making a watertight seal and defending the car from injury.
Automobile Floor Preparation
Thorough car floor preparation is crucial for a profitable set up. This step is essential for making certain the flares adhere correctly and look skilled.
| Step | Motion | Particulars |
|---|---|---|
| 1 | Cleansing | Completely clear the realm the place the flares can be put in. Take away any filth, grease, wax, or different contaminants. Use a degreaser or a high-quality cleaner for a radical cleansing. |
| 2 | Measuring | Rigorously measure the realm the place the flares can be put in. Make sure the measurements match the flare’s dimensions. Exact measurements are vital for a correct match. |
| 3 | Marking | Mark the car’s floor the place the flares can be hooked up. Use a pencil or marker to create exact markings for correct placement. Clear markings assist keep away from misalignment. |
Putting in Fender Flares – Fundamental Steps
Fender flares add a contact of favor and defend your car’s physique from highway particles and rocks. Correct set up is vital for a long-lasting, handsome end and making certain the flares keep securely hooked up to your experience. This part particulars the method, specializing in numerous mounting strategies in your comfort.Putting in fender flares appropriately is essential for his or her longevity and aesthetics.
A well-executed set up will mix seamlessly together with your car’s design and supply the supposed safety. Take note of element all through all the course of for an expert outcome.
Mounting Strategies
Completely different mounting strategies can be found, every with its personal set of professionals and cons. Understanding these variations will show you how to select one of the best strategy in your car and preferences.
- Screws or Bolts: This methodology is a basic strategy for putting in fender flares. It sometimes includes pre-drilled holes within the flare and mounting the flare utilizing acceptable screws or bolts. That is usually probably the most dependable methodology and gives a strong maintain. Make sure the screws are lengthy sufficient to totally penetrate the flare and the mounting floor, and use the proper measurement and kind of screws to forestall injury or loosening over time.
A great instance is utilizing chrome steel screws to withstand rust and corrosion.
- Rivets: Riveting is one other strong mounting choice. Utilizing rivets requires a specialised software, and a talented hand to correctly safe the flares. Riveting presents a really robust, everlasting bond. Nonetheless, the method is extra time-consuming, and errors will be troublesome to rectify. A great instance can be utilizing a rivet gun for quicker, extra managed set up.
- Adhesive: Adhesive set up is a faster strategy, appropriate for conditions the place a extra non permanent or much less everlasting answer is most well-liked. Utilizing high-quality adhesive ensures a strong bond and good adhesion, however cautious preparation of the floor and the flare is crucial. A powerful adhesive is crucial to withstand the stress and vibration over time. For instance, utilizing an epoxy adhesive would offer a long-lasting bond.
- Bolt-On: A bolt-on methodology sometimes includes mounting the fender flares utilizing pre-drilled holes and acceptable bolts, usually together with specialised mounting brackets. This methodology gives a safe maintain. Bolt-on kits often embrace all the mandatory {hardware}, making the set up easy. It is a nice choice for individuals who choose a extra exact, skilled look. An instance is using customized fender flare kits with exactly engineered mounting brackets.
Alignment and Ending
Correct alignment of the flares is crucial for a easy, completed look. Make sure the flares are appropriately positioned and stage with the car’s physique. Any misalignment can be very noticeable. A great tip is to make use of a stage or straight edge to test the alignment earlier than tightening the mounting {hardware}.
Mounting Technique Comparability
| Mounting Technique | Benefits | Disadvantages |
|---|---|---|
| Screws/Bolts | Robust, dependable, comparatively simple to put in, available {hardware} | Requires pre-drilling, potential for injury if not executed appropriately |
| Rivets | Very robust, everlasting bond, no want for pre-drilling in some circumstances | Extra time-consuming, specialised instruments required, troublesome to restore or take away |
| Adhesive | Quicker set up, probably decrease price, simpler for some DIY tasks | Much less everlasting, might require extra floor preparation, vulnerable to motion over time |
| Bolt-On | Safe, exact, usually consists of crucial {hardware}, good for an expert look | Might be costlier, would possibly require extra brackets |
Putting in Fender Flares – Superior Methods: How To Set up Fender Flares
As soon as you have mastered the essential set up, tackling complicated physique panels and difficult alignment points requires superior strategies. This part dives into modifying current mounting factors, creating new ones, and making certain exact becoming for optimum outcomes. Understanding these strategies will prevent time and frustration, leading to a flawless set up.Superior set up usually includes extra than simply bolting on the flares.
It could require cautious planning, exact measurements, and specialised instruments to make sure a safe and aesthetically pleasing match, particularly on automobiles with distinctive physique contours or complicated panel shapes.
Modifying Present Mounting Factors
Modifying current mounting factors is essential for a safe match, particularly on automobiles with complicated physique traces. Improper modification can result in a poor match or injury to the car’s bodywork. Rigorously consider the prevailing mounting factors and decide in the event that they’re enough for the flares. If not, you will have to strengthen or modify them to accommodate the flares’ weight and stress.
This may occasionally contain drilling new holes, including reinforcements, or modifying current brackets.
Creating New Mounting Factors
Typically, the prevailing mounting factors aren’t appropriate for the flares. In these circumstances, you would possibly have to create new ones. This usually includes cautious planning and exact measurements. Start by figuring out appropriate places for brand spanking new mounting factors. Use templates or rigorously hint the flare’s mounting factors onto the car’s physique panels.
Drill pilot holes to make sure correct placement. Then, use acceptable fasteners and reinforcements to safe the brand new mounting factors. Think about using adhesive-backed plates or customized brackets for added power and stability.
Exact Becoming and Alignment in Difficult Areas
Attaining exact becoming and alignment in difficult areas, resembling round wheel wells or complicated curves, is significant for an expert look. Use shims and spacers to regulate the flare’s place till it aligns completely with the physique traces. Rigorously test for gaps and misalignments, particularly in tight areas. Think about using a physique alignment software or a straight edge to make sure the flares are completely flush with the car’s physique.
Take your time and be methodical.
Specialised Instruments for Particular Conditions
Specialised instruments are important for tackling complicated set up conditions. A number of examples embrace:
- Physique Alignment Instruments: These instruments assist guarantee correct alignment, significantly in curves and tight areas. They help in attaining a easy transition between the flare and the physique, minimizing gaps and maximizing precision. A great instance can be a set of precision alignment clamps, which may help be certain that the flare is positioned appropriately and avoids misalignment in difficult areas.
- Measuring Instruments: Exact measurements are vital. Use calipers, rulers, and templates to precisely mark the car’s physique for drilling and fastening. Correct measurements stop errors and guarantee a correct match. Digital calipers are glorious for correct measurements.
- Drilling Instruments: Use a drill press for exact and constant drilling, particularly when creating new mounting factors. A drill press permits for managed drilling, lowering the chance of damaging the car’s bodywork. Make sure the drill bit is suitable for the fabric you are working with.
- Flare Adjustment Instruments: Some flares include particular adjustment instruments. These instruments make exact changes simpler, particularly in tight areas. The producer’s directions will present particular particulars about utilizing them.
Software and Method Comparability by Automobile Kind
Completely different car varieties current distinctive set up challenges. A scientific strategy is required.
| Automobile Kind | Set up Software Issues | Set up Method Issues |
|---|---|---|
| Compact Automobiles | Precision drilling instruments, smaller shims, and specialised clamps for tight areas are useful. | Concentrate on exact measurements and cautious alignment in tight wheel wells. Cautious use of shims and spacers is essential. |
| SUVs | Bigger shims, adjustable brackets, and stronger fasteners are sometimes wanted. Use physique alignment instruments to handle giant panels. | Exact measurement and alignment are key, particularly across the wheel wells. Think about using reinforcing plates in areas the place extra power is required. |
| Vehicles | Heavy-duty fasteners, reinforcements, and probably specialised instruments for bigger flares are required. | Concentrate on securing the flares to forestall injury because of the excessive stress areas. Guarantee strong mounting factors. |
Ending Touches and Aftercare
Congrats on putting in your fender flares! Now that the laborious half is over, it is essential to make sure an ideal match and long-lasting safety. Correct aftercare is vital to maximizing the lifespan and efficiency of your new flares.Cautious consideration to element throughout the ending touches will assure a professional-looking set up and forestall potential points down the highway. This part will information you thru important steps for checking alignment, cleansing, sealing, and sustaining your new flares.
Checking Match and Alignment
Correct match and alignment are paramount for aesthetics and performance. Visually examine the flares for any misalignment, gaps, or unevenness. Use a straight edge to verify the flares are flush towards the physique panels. Make sure the flares are securely mounted with none extreme stress on the mounting factors. Search for any indicators of distortion or bending within the flares themselves.
A slight hole is appropriate, however vital gaps or misalignment want quick consideration.
Cleansing and Sustaining Flares
Common cleansing prevents filth buildup and maintains the looks of your flares. Use a light cleaning soap and water answer to wash the flares. Keep away from harsh chemical substances or abrasive cleaners that might injury the end. After washing, rinse completely and dry utterly. Think about using a protecting wax or sealant to additional defend the flares from the weather.
Sealing to Stop Water Intrusion
Correct sealing is vital to forestall water intrusion and potential injury to your car. Examine all seams and joints for any gaps or leaks. Make sure the sealant used throughout set up is correctly cured and gives a watertight seal. If crucial, apply extra sealant to any areas the place water would possibly penetrate. Pay shut consideration to the areas the place the flares meet the physique panels and the perimeters of the flares.
Inspecting and Tightening Fasteners
Periodically examine and tighten all fasteners to take care of a safe set up. Over time, vibrations and highway situations can loosen fasteners. Examine all bolts, screws, and clips commonly, particularly after just a few weeks of use. Tighten any free fasteners to forestall them from changing into free, which might injury the flares or have an effect on their match. Tightening the fasteners an excessive amount of can injury the flares.
It is essential to take care of a steadiness between tightness and avoiding injury.
Put up-Set up Inspection and Upkeep Abstract
| Step | Motion | Significance |
|---|---|---|
| Visible Inspection | Examine for misalignment, gaps, or unevenness. | Ensures an expert look and correct perform. |
| Cleansing | Use gentle cleaning soap and water, rinse, and dry. | Prevents filth buildup and maintains look. |
| Sealing | Examine for gaps and leaks, apply sealant if wanted. | Prevents water intrusion and injury. |
| Fastener Inspection | Examine and tighten bolts, screws, and clips. | Maintains safe set up and prevents potential injury. |
Troubleshooting and Frequent Points
Putting in fender flares will be difficult, and issues can come up. Understanding potential points and the right way to repair them will prevent time and frustration. Cautious planning and a spotlight to element throughout set up can stop many widespread issues.Fender flares, whereas enhancing your car’s look, will be difficult to put in appropriately. Improper alignment, poor match, and even easy errors can result in points.
This part particulars widespread issues and efficient options to make sure a easy and profitable set up.
Alignment Points
Fender flares should be exactly aligned with the car’s physique traces for a seamless look. Misalignment may end up in gaps or unevenness, affecting the aesthetic attraction and probably compromising the structural integrity of the flares. Rigorously checking and adjusting the flare’s place towards the car’s physique contours is essential. Utilizing shims or spacers could be crucial to make sure an ideal match.
Match Issues
Fender flares are designed to suit particular car fashions, and incorrect sizing can result in vital match points. Checking the flare’s dimensions towards your car’s physique measurements earlier than set up is vital. Incorrectly sized flares might not adhere securely, leading to gaps or uneven surfaces. If the flares do not match correctly, it is important to return them for the proper measurement or seek the advice of the producer for different options.
Harm Throughout Set up
Fender flares will be broken throughout the set up course of if not dealt with with care. For instance, scratching the car’s paint or bending the flare itself are potential points. Utilizing protecting coverings and taking precautions when working with instruments are necessary to keep away from these points. If injury happens, handle it promptly.
Frequent Errors and Options
- Incorrect Bolt Placement: Bolts should be positioned exactly for safe fastening. Misplaced bolts can result in the flare not seating appropriately or changing into free. Double-check the directions for exact bolt places.
- Inadequate Adhesive: Utilizing inadequate adhesive may end up in the flare not adhering correctly. Make sure you apply the correct quantity of adhesive, following the producer’s suggestions. Making use of an excessive amount of or too little adhesive may cause points.
- Poor Floor Preparation: A clear and correctly ready floor is significant for optimum adhesion. Dust, grease, and different contaminants can stop the flare from sticking appropriately. Completely clear the floor to make sure correct bonding.
Troubleshooting Desk
| Downside | Potential Trigger | Answer |
|---|---|---|
| Flares not aligned | Incorrect placement, mismatched measurements | Re-position flares, test for correct alignment towards the car’s physique, use shims if crucial. |
| Flares not adhering securely | Inadequate adhesive, improper floor preparation | Apply extra adhesive, clear the floor completely, guarantee appropriate software approach. |
| Harm to the car or flares | Improper dealing with, utilizing blunt or broken instruments | Defend the car’s paint, use acceptable instruments, deal with the flares with care. |
| Flares not becoming appropriately | Incorrect measurement, improper measurements | Examine the flares’ dimensions towards your car’s specs, return for the proper measurement if wanted. |
Illustrative Examples
Fender flares add a rugged, customized look to any car. Understanding the right way to set up them correctly for various car varieties and physique types is essential for a profitable final result. This part gives detailed examples to information you thru the method.Correct set up ensures a safe and aesthetically pleasing match, enhancing the car’s look and probably defending the physique from highway particles.
It additionally requires cautious consideration to measurements and particular strategies for every car kind.
Set up on a Pickup Truck
Putting in flares on a pickup truck usually includes extra complicated measurements because of the truck’s distinctive construction and potential for various mattress sizes. The additional size and load-bearing capability of the mattress necessitate exact alignment and mounting. Rigorously measure the truck’s mattress and the flares’ dimensions to make sure a cosy match. Make sure the flares are securely hooked up to the truck’s physique, particularly in the event that they lengthen past the manufacturing facility wheel wells.
Utilizing specialised mounting {hardware} for vehicles is beneficial.
Set up on an SUV
SUV flares, whereas usually related in course of to pickup truck flares, would possibly want changes for the car’s bigger wheel wells. Exact measurements are vital for an ideal match. The bigger floor space of an SUV calls for higher consideration to making sure a seamless transition between the flare and the physique. A powerful understanding of the car’s physique traces is essential for attaining a clear {and professional} set up.
Picture Description: Set up on a 2020 Toyota Tacoma, Tips on how to set up fender flares
Think about a 2020 Toyota Tacoma. The picture would present the truck with the flares partially put in. The flares can be in a close-up shot, clearly exhibiting the exact alignment towards the wheel wells. Seen are the mounting {hardware}, securing the flares firmly to the truck’s physique. Within the background, partially seen, are instruments like a tape measure, a stage, and probably a wrench.
The picture would emphasize the significance of exact measurements and alignment.
Set up on Completely different Physique Types
Completely different car physique types require completely different set up strategies. For instance, a rounded SUV physique would possibly require a distinct strategy in comparison with a sharp-edged truck. The physique’s contours dictate how the flares are minimize and fitted to realize a easy transition. Understanding the car’s particular physique type is essential for a profitable set up.
Examples of Profitable and Unsuccessful Installations
A profitable set up demonstrates an ideal match, correct alignment, and safe mounting. The flares are flush towards the car’s physique, enhancing its aesthetic attraction with out compromising structural integrity. An unsuccessful set up, conversely, exhibits misalignment, gaps, or insecure mounting. This usually outcomes from inaccurate measurements, improper slicing, or inadequate fastening. Within the case of misalignment, a re-measurement of the car’s wheel wells and flare dimensions is required.
Visible Information: Putting in Flares on a Honda CR-V
| Step | Description | Picture |
|---|---|---|
| 1 | Put together the car and crucial instruments. | A photograph of the CR-V on a stage floor, exhibiting the mandatory instruments (screwdrivers, pliers, tape measure, stage) laid out. |
| 2 | Measure the wheel effectively dimensions. | An in depth-up of the CR-V wheel effectively, with a tape measure clearly indicating the measurements taken. |
| 3 | Mark the flare placement on the car. | A photograph of the CR-V with the flare templates positioned exactly on the wheel effectively. |
| 4 | Lower the flare to measurement. | A photograph of the flare being minimize utilizing a pointy utility knife, with the suitable minimize traces highlighted. |
| 5 | Set up the mounting {hardware}. | A photograph of the flare being mounted to the car’s physique, exhibiting the mounting {hardware} in place. |
| 6 | Examine for alignment and match. | A photograph of the CR-V with the flares put in, with an emphasis on the alignment and match. |
Conclusive Ideas
So, you are able to improve your car with trendy fender flares? This information has offered an entire walkthrough, overlaying the whole lot from preliminary preparation to post-installation upkeep. Keep in mind, cautious planning and execution are key to a profitable set up. By following the detailed steps and troubleshooting ideas, you’ll be able to confidently deal with this undertaking, attaining a customized look that enhances your car’s attraction and efficiency.
From prepping your experience to attaining a refined end, you are now geared up to confidently set up your fender flares!
Common Inquiries
What are the commonest errors individuals make when putting in fender flares?
Frequent errors embrace improper floor preparation, incorrect measurement, and poor alignment. Failing to completely clear and prep the floor can result in uneven adhesion or flaking, whereas inaccurate measurements end in misaligned flares. Guaranteeing exact alignment throughout set up is essential for an expert end.
How do I select the proper fender flares for my car?
Think about your car’s make, mannequin, and yr when choosing flares. Search for flares that match your car’s physique traces and magnificence preferences. Guarantee compatibility and measure the wheel effectively dimensions to ensure an ideal match. Additionally, take into account the fabric, price, and sturdiness of various choices.
What instruments do I want to put in fender flares?
Important instruments embrace a measuring tape, security glasses, a drill, screws or rivets (relying on the flare kind), a screwdriver, a hammer, and presumably specialised instruments for sure set up strategies. Additionally, remember about primary security tools like work gloves and ear safety.
What are one of the best strategies for sealing fender flares to forestall water intrusion?
Use high-quality sealant particularly designed for automotive use. Apply a beneficiant however even coat across the edges and seams of the flares. This helps create a watertight seal, stopping water from coming into the wheel wells and inflicting potential injury to your car.
